BossCover
EPDM strips

Name: BossCover EPDM-Stroken
Brand: BossCover
Availability: InStock

Our EPDM strips have the same quality characteristics as our membrane. They can be applied throughout the building envelope, from roof to façade, and even in the building base. For every application, we offer a selection of various thicknesses and widths.

Download the brochure

Why EPDM strips?

Versatile and flexible

EPDM strips for façade and building base

The fully water-resistant EPDM provides a water barrier in the building, preventing rising moisture from penetrating into the façade and load-bearing walls.

EPDM strips for windows and doors

An EPDM strip around windows and doors prevents water or wind from infiltrating the building or façade. Formation of moisture is thus prevented.

EPDM strips for dormers

The strips are used to create a wind- and waterproof connection between the roof and dormer window. The elasticity and flexibility allow detailled finishing.

EPDM strips for gutters

Any leaking gutter can be repaired with an EPDM strip. The advantage is that EPDM can be applied to a wide variety of surfaces. Corners and other details can be flawlessly finished.

Properties of the EPDM strips

Resistant to weather conditions

long lifespan

versatile in use

Strong and elastic

easy installation

flameless installation

1.00 mm thick - 30.48 m long
1.10 mm thick - 30, 48 m long

1.50 mm thick - 30.48 m long

width: 10 cm | 15 cm | 20 cm | 30 cm | 40 cm | 45 cm | 50 cm | 60 cm | 70 cm | 80 cm | 90 cm | 100 cm | 120 cm | 150 cm

width: 10 cm | 20 cm | 30 cm | 40 cm | 50 cm | 60 cm | 80 cm | 90 cm

Use the strips in combination with:

Within the full BossCover range, we strive to offer the best products. By using our strips in combination with the adhesives and primers listed below, we can guarantee an optimal result.

EPDM Seal

BossCover EPDM Seal is a high-quality, single component elastic and neutral sealant based on silane polymers that quickly forms a film. The product provides excellent adhesion to many materials and maintains permanent elasticity after curing.

Primer

BossCover Primer is a polymer rubber-based primer used for quick and effective pretreatment of EPDM that need to be bonded with an overlap tape or cover tape. The primer can be applied to all surfaces such as concrete, wood, metal and therefore to all types of EPDM.

Spray Bond

BossCover Spraybond is a heat-resistant contact adhesive specially developed for bonding various types of EPDM to all substrates. It gives exceptionally strong adhesion to many materials such as wood, alu-covered and bitumen-covered insulation boards, etc.

thicknesses: 0.75 mm, 1.00 mm, 1.10 mm, 1.50 mm

widths ranging from 10 cm to 150 cm

lengths: 30 m and 30.48 m

infinite

possibilities

VERSATILE

EPDM strips, a versatile solution for wind and waterproofing details in roof, façade and building footings.

BossCover
EPDM strips